Features Smoke Lens that ''blacks-out'' face when power is off.
Water Temperature controller gauges are all electric and microprocessor brushless stepper controllers. ProParts engineers added a built in programmable thermostat to control any temperature regulated devices from Radiator fans to transmission fans etc. You can program the High and Low temperature set points that you want the fan to activate and the Spek gauge will control your fan. The Fan turns ON when the High setting is reached and the fan will stay running until the temperature is lower to the desire Low release setting The temp sensor is a 1/8-27 NPT with a water resistant electrical connector. All Spek gauges will flash if sensor input is lost. To operate a high current load such as a fan or valve you will need option 722-14820 high current relay and wire harness.
Features:
Built-in programmable Thermostat to control Fans etc. Background warning light can be programmed to
flash at set points
Lighted High and Low programmable warning settings, background will flash Red if high or low limits are hit.
Plug and Play wire harness for easy installation.
2 Outputs to drive a 2 amp load when set High and Low limits are activated. If a fan option is need Part
PEAK playback and flashing ON/OFF warning background is limits are hit. (This feature can be disabled)
Part 722-14820 Non-Water resistant 40 Amp relay with 10 foot pre-wired # 12 Gauge wire and harness.
